Home > NEWS >


How to fill a scuba tank

2019-05-20 09:46


    1. Connect the hose to air tanks

a.The tanks max pressure must be bigger than the compressor rated working pressure

b.Check the hose well

c.Connect the hose to air tanks,and open the air tank valve

d.Open the drain valve

2. Connect the hose to compressor out end

3. Start the compressor,close the drain valve when it runs smoothly,check the pressure gauge will rise up,please stop and check if there is anything abnormal

4. When the pressure reaches the pressure,stop the machine,and close the valve on the air tanks,if you don’t stop the machine,safety valve will work and pressure will not go up

5. Drain the valves,discharge the pressure and vapour

6. Discharge the air tanks after release the pressure in the hose